1A Solar Li-ion and Li Polymer Battery Charger Board CN3165 with Boost Converter 5V/1A
TOP
The Solar Charger Board can be controlled in a programmed way (Service Port PH2-8pol. JST) or without an external control.
There is a corresponding description on page 2 of the documentation.
With the appropriate solder bridges, the Solar Charger Board is then configured for programmed or non-programmed control
become. With the programmed control it is possible to monitor the charging current and solar voltage.
Without a programmed control, 4 LEDs are available, which indicate the battery voltage and charge status.
The LEDs D1 and D2 are not soldered in, but are included in the kit.
Charging is possible via the Solar Panel or Mini USB input. (Note the SB bridges!)
Scope of delivery:
1 x Lipo Charger Board 0.4a
1 x 3mm Low Power LED - Red
1 x 3mm Low Power LED - Yellow
2 x LED spacers for 3mm LED
2 x PH 2.0 cable 200mm 2pol (red - black)
1 x PH 2.0 cable 200mm 8-pin. ( different colors / or one color )
SolarCharger1_04a.pdf
CN3165-Charger.pdf
There is a corresponding description on page 2 of the documentation.
With the appropriate solder bridges, the Solar Charger Board is then configured for programmed or non-programmed control
become. With the programmed control it is possible to monitor the charging current and solar voltage.
Without a programmed control, 4 LEDs are available, which indicate the battery voltage and charge status.
The LEDs D1 and D2 are not soldered in, but are included in the kit.
Charging is possible via the Solar Panel or Mini USB input. (Note the SB bridges!)
Scope of delivery:
1 x Lipo Charger Board 0.4a
1 x 3mm Low Power LED - Red
1 x 3mm Low Power LED - Yellow
2 x LED spacers for 3mm LED
2 x PH 2.0 cable 200mm 2pol (red - black)
1 x PH 2.0 cable 200mm 8-pin. ( different colors / or one color )
SolarCharger1_04a.pdf CN3165-Charger.pdf
