Testboard unassembled to that STM32F746BGT6 with the following properties:
PCB 100mm x 160mm Immersion gold
2 x 32MB SDRAM ( 1 x 32MB Videoram ) ( 1 x 32MB for general data )
USB-OTG interface
Ethernet interface ( LAN8710A ) ( Ethernetbuchse LU1S041X-43 )
64MBit Serieller Flash
Sondcontroller BU8793KN-E2 mit amplifier ( SSM2305RMZ )
WLAN Modul GS1011MIx can be equipped ( own supply with HT7833 )
NRF24L01+ Wireless module Connector ( own supply )
2 x CAN I/O get out.
power supply +8V .. +12V Eingang ( interne supply +5V/2A, +3,3V/1A, 3,3V/500mA )
MicroSD Card
JTAG / Trace interface
LCD/TFT Controller des M7 auf 50pol. Plug out. In addition to the connector:
- I2C, SPI, optionalen Kapazitiven Touch interface, +5V und +3,3V.
Spezial Connector for Motorsteuerung 2x10pol.
We supply data for producing a paste template.
Schematic, assembly , BOM and Pick and Place are available under documents
The printed circuit board was tested with the display, ER-TFT050-3 von EastRising ( 800x480 ).
The layout data for the adapter board to the display ( oder Gerber ) can be requested. are in Altium format.
Data about the display frame is available in STEP and STL. So you can print yourself in 3D.
Display frame to the display are still some available. Just ask.
